The adhesive all-rounders for the automotive industry

Lohmann: the development partner and motor for your success

Today, building vehicles is more complex than ever. The reasons are manifold: on one hand the enormous increase in customer demand for quality, design and comfort, on the other, the search for innovative materials, new manufacturing technologies and more efficient processes for manufacturers and suppliers.

Good to know that high-end adhesive solutions make an important contribution and increasingly represent an alternative to screws and clips. Thanks to their enormous flexibility, adhesive bonds adapt perfectly to a wide variation of designs to ensure reliable fixing. In addition, adhesive tapes fulfil many practical supplementary features. Thus vehicles are becoming lighter, virtually vibration-free, and quieter. No wonder that today, an automobile contains on average about 4.5 m² of tape.

What our customers value about Lohmann: With each new adhesive solution, we have the whole process in mind. Which specific requirements are placed on the tape? Is a roll required, an efficient spool or a high-precision die-cut? On which substrates should be bonded? How can we find a particularly efficient solution for automation? These are just some of the questions whose answers are important to us from the outset. We focus on one single goal: to find the perfect adhesive solution for your application.

Convince yourself of our know-how and get to know a partner who achieves more for you.

Content_TRA_Icon_DesignFunction.jpg

One of the biggest challenges to the automotive industry is the joining of different materials and surfaces. We face this challenge and accompany you throughout your whole process. Beginning with the requirement analysis via the development and formulation to the finished die-cut part. We ensure the highest quality and efficiency and are always on the cutting edge. Our portfolio covers the bonding of emblems and lettering, kick plates and roof trims, exterior mirrors, decorative parts and trim parts. In this connection, we also offer solutions for various clear coat systems.

Content_TRA_Ledersitze.jpg

Example: Leather reinforcement - Interior (seats)

  • flexible and strong reinforcement
  • high bi-directional stability
  • does not influence the stitching process
  • low emission
  • Die-cuts in any shapes
  • good adhesion to leather
  • available in black (for dark and coloured leather) and withe (for withe and light coloured leather)
Content_TRA_Säulenverkleidung.jpg

Example: Pillar cladding (interior)

  • The tape is suitable for deep drawing due to the film liner and the flexible foam carrier
  • Automatic application process possible
  • Cost intensive, subsequent lamination processes are unnecessary
  • High ageing and chemical resistance
Content_TRA_Galssbonding.jpg

Example: Bonding on glass without pretreatment

  • Direct bonding on glass without activator
  • Save working steps as there is no need of masking and activating the glass before bonding the part
  • The permanently elastic polyethylene foam allows the compensationof linear expansions due to different thermal coefficient of expansion of the substrates
  • The compressible foam carrier is better in compensating component tolerances than hard foamed systems
  • Die-cuts in any shapes available
Content_TRA_Einstiegsleiste.jpg

Example: Kick Plates

  • Compensates for unevenness (cleavage measure) due to the flexible foam carrier
  • Depending on the bonding without pre-treatment possible (even on plastics)
  • Compensation of different Material expansion coefficients (tension absorption)
Content_TRA_Einparksensor.jpg

Example: Park Distance Control Sensor (PDC Sensor)

  • Secure bonding possible without pre-treatment
  • Flexible foam carrier compensates for component tolerances
  • Available as customer-specific die-cut
Content_TRA_SideViewMirror.jpg

Example: Bonding exterior mirrors

  • Die-cut parts available in various shapes
  • No interaction between tape and heating system
  • Fulfills Donnelly specification (shatter protection)

Content_TRA_Icon_NVH.jpg

It rattles, rumbles, squeaks, creaks, rattles? We have countless sound-reducing materials with which we can precisely outfit your surface self-adhesively. Whether as a roll, coil, sheet, or die-cut part, we can always offer you a customized solution.

Content_TRA_DVD-Pad.jpg

Example: DVD pad

  • Easy assembly by custom-fit positioning of several tape stripes on one liner
  • Exact positioning due to die-cut form
  • Quick processing as only one liner has to be removed
  • No curing times compared to liquid systems
  • Clean application compared to liquid systems
Content_TRA_CableFastening_300.jpg

Example: Cable Fastening.

  • Noise-reducing properties, rattle protection
  • The flexibility of the tapes guarantees an easy covering process of the wiring harness on the headliner especially in curves
  • Effective protection against abrasion of round and flat cables
  • Faster production process compared to hot melt systems (no curing time)
  • No risk of injuries for workers during assembly process compared to hot melt systems
Content_TRA_Single sided foams.jpg

Example: Single-sided sealing foams

  • Good adhesion to plastic surfaces without pre-treatment
  • Excellent damping properties
  • Excellent sealing properties due to smooth closed cell foam carrier
  • Various foam/adhesive combinations possible (different thicknesses and densities)
  • Die-cuts in any shapes
  • Good processability due to dimensionally stable design
Content_TRA_ExteriorsBumpers.jpg

Example: Combination of expanded polypropylene (EPP) and adhesive tape.

  • Many different combinations of EPP die-cuts and adhesive tapes are realizable
  • Expanded polypropylene has noise dampening properties and high dimensional stability
  • EPP can be die cut in any two dimensional form (limited only by EPP raw material block dimension)

Content_TRA_Icon_StructuralBonding.jpg

For new developments the requirements for adhesive joints are constantly growing. Additionally, a lot of new, innovative materials are used which can't be bonded any longer with mechanical solutions like rivets or screws without destroying the structural integrity of the materials. New surfaces which are dirt-repellent or self-curing are really challenging for adhesives. The reactive adhesive tapes DuploTEC® SBF from Lohmann combine the performance of structural bonding with the ease in handling of a pressure-sensitive adhesive tape.

DuploTEC® SBF are easy to handle, dimensionally accurate, can be applied in advance and can therefore be processed quickly and cleanly. 

Characteristics of the DuploTEC® SBF

  • High structural strength
  • Constant and reliable adhesive film thicknesses guarantees consistent bond layers and smart processes
  • Suitable for the KTL Process
  • Compensation of different thermal expansion of materials
  • With or without initial tack (depending on adhesive technology)
  • Available as die-cuts

Areas of Application:

  • Bonding of lightweight materials such as GRP (glass-fibre reinforced plastic, CFRP, aluminum and plastics
  • Corrosion protection (for example, in aluminum-steel bonds)
  • Textile lamination

 

Content_TRA_GlassMetalBonding.jpg

Glass Metal Bonding with DuploTEC® 10630 SBF (Epoxy)

  • Heat curable
  • Easy to use
  • No primer needed
  • Curable during the autoclave process/li>
  • Pre-application possible (for example to mirror base or sensor holder)
  • Available as die-cuts
Content_NTBD_Magnetverklebung.jpg

Magnet Bonding with Onyx-Technology (Epoxy)

  • Heat curable
  • Easy to use
  • Pre-application possible
  • Extreme resistances
  • Corrosion protection
  • Available as die-cuts

Content_TRA_Textillaminierung.jpg

Textile lamination with Topaz-Technology (Polyurethane)

  • Reliable and strong textile bond which stays flexible and elastic even after curing
  • Pre-laminations fit for storage up to 3 months
  • Moderate application temperature leads to temperature resistant and reliable multilayer bonds

Content_TRA_Icon_AutomotiveElectronics.jpg

The automotive sector is one of the leading industries worldwide. Mega-trends (for example, autonomous driving and electric mobility) are, together with factors such as climate change, security and globalization, todays challenges. The electronics in the vehicle thus play a key role in the meantime and must continually become even more compact and lighter in view of the ever-increasing demands on performance and reliability - and this is exactly where the adhesive solutions from Lohmann come into play!

'With our customer-oriented bonding technology, we cover all areas of application of vehicle electronics from:

  • Power Train & Chassis
  • Telematics & Infotainment
  • Safety
  • Comfort & Convenience
  • Engine Electronics/ Engine Control

Adhesive solutions from Lohmann are tailor-made - whether coils, rolls or die-cuts. Everything is focused on one goal: the perfect adhesive solution for your application!

Content_TRA_AirFlowSensor.jpg

Example: Bonding of an air flow sensor on a ceramic panel

Material: Double sided adhesive mounting tape with high loading capacity and a closed-cell polyethylene copolymeric foam

  • Electronic control system for waste gas recirculation
  • Defined foam density
  • High initial tack
  • High final adhesion
  • Precision die-cut
Content_TRA_NavigationSealing.jpg

Example: Bonding of displays, design or functional elements.

Material: Double-sided adhesive/ transfer tapes or double sided PE- or PU-foams

Content_TRA_NavigationESDProtection.jpg

Example: Surface protection

Material: Single sided protection films/ LDPE foil 50 or 70µ, blue or transparent

  • low adhesion strength
  • easy peel off
  • residue-free removable

Content_TRA_PCBPlatine.jpg

Example: Electrical management/ Electrical insulation, reflow soldering

Material: Single sided adhesive polyimide film

  • Electrical insulation
  • Heat insulation
  • Protection against contamination and interaction (e.g. tin-solder vs. Gold contacts)

Interested in finding out more?

Then contact us. We will be pleased to help.

  Brief_250x150_white.png  

Adhesive technology news for your industry: 

Sign up now!

Contact form Transportation


Productportfolio Transportation en.pdf
Productportfolio Transportation en.pdf

More documents can be found in our

download-area.